DelZaster Supra Request

Car: 1998 Toyota Supra RZ (I have 1 with body kit etc ready to send)

Name/Number/Flag: DelZaster - 180 - Union Jack

Artwork: SATS Motorsport Drift Supra (British Drift Championship)

Required Decals: ALL Plus number board etc for Boosted's Drift League
Reference Pictures: I can probably find more pics if needed

http://www.speedhunters.com/2012/01/car_spotlight_gt_gt_2012_sats_supra/
http://seiboncarbon.com/wp-content/uploads/2012/04/SH-ASI12A-1.jpg

Spec: T/U To be discussed

I will need to quote rough before I decide spec etc. Plus I see the finished car has blue rims not sure what looks best yet. A nice little job for shane LOL. I may also want our web address/Delzaster Logo etc so will need to discuss.

I am estimating between 5-10hrs.
U spec = 2.5-5M
T spec = 5-10M

I know its a big window but the negative space tear design for the blue and the turbo graphic are the wild cards.

Well I want it anyway mate thats cool ty sir and I can choose the spec when its done if thats ok with you m8.

Thank you

WIP
Several more logos and the Turbo graphic to do.

Two design flaws thanks to Forza.
1. Just behind the rear wheel well at the bottom there is a spot that can't have vinyls applied.
2. Just above the rear wheel well there is another spot that can't have vinyls applied

Changing the the body work has no effect on these errors.

Looks good to me mate

I am at 746 layers on the side so far. You are going to have to prioritize the remaining 4 logos. You are probably only going to fit 2 or 3 of the following into those remaining 254 layers.
Universal Turbo
Turbo graphic
Super Pro
Cobra

The rear is complete, had to shift logos off their designed areas due to the Toyota medallion and rear bumper shape differences. The front will not have the Maxxis MA-Z1 Drift Tyre text due front end shape differences.

Current status...

Ok looks good mate thank you very much.

If the turbo graphic was left off would the rest fit?

Just thinking

Super pro
Cobra
Universal Turbo

and leave off the Turbo Graphic?

Let me know what you think buddy at least that would save you having to make that damn Turbo LOL.

DelZaster wrote:Ok looks good mate thank you very much.

If the turbo graphic was left off would the rest fit?

Just thinking

Super pro
Cobra
Universal Turbo

and leave off the Turbo Graphic?

Let me know what you think buddy at least that would save you having to make that damn Turbo LOL.

Well that would be hard to say with out doing it first. I figure the next most important logo would be the Universal Turbo logo. Then would be the Cobra, only because it would leave a void on the side skirt. It is a toss up after that because the Super Pro is in a spot that would be all distorted by the body work on your car and the Turbo graphic is in a location already tagged with the VP logo. I just wanted to have you make the call as to which you wanted more should the situation arise where I can not fit all the decals.

Ah ok I hear you mate. You do what you think is best I am fine with that.

Thank you

10 Hours total.

I removed the rear Meister logo to fit the rest of the logos in question.

Thank you sir it looks awesome mate.

If you about tomorrow we can talk spec n price etc n il pay asap sir

Transaction completed.